MotorClaw.news
Subscribe
Search releases, companies, topics...
Updated

Cummins' winter truck checklist: brakes, tires, driveline, steering and a daily pre-trip routine

Cummins is telling fleets and drivers to inspect brakes, tires, drivelines, steering and suspension before severe weather hits — and to make winter pre-trip checks a daily habit.

Brake pad wear that triggers a wheels-off inspec
75%
Areas Cummins says to focus on for winter prepar
5
Steps in Cummins' winter pre-trip routine
5

What Happened

Cummins says cold weather can make a demanding job even tougher on a truck: freezing temperatures, moisture, ice and deteriorating road conditions can affect components throughout the vehicle, from brakes and air systems to the driveline and suspension. The company recommends a winter maintenance plan that helps fleets and drivers identify potential issues before they result in downtime. Start by reviewing service needs before severe weather arrives, then make thorough pre-trip inspections part of the daily routine. Cummins lists five areas to focus on when preparing a truck for winter.

Moisture in air lines can freeze, and worn brake components may be exposed to snow, ice and road debris, so Cummins advises having a qualified technician inspect the braking and air systems according to the vehicle and component manufacturers' recommendations before winter arrives. On air disc brakes, a wheels-on inspection checks brake pads, rotors and calipers for wear or damage; if the brake pads are 75% worn, a technician should perform a wheels-off inspection to determine whether replacement is needed, and replacement parts that fit the equipment should be planned for in advance. Brake shoes and drums should be inspected for wear and other issues because moisture can freeze and cause trailer brake shoes to stick to drums. Air systems should be watched for signs of freezing in air lines or excessive air purging, the air dryer cartridge performance checked and the cartridge replaced when required, and components such as automatic slack adjusters, S-cams and associated hardware inspected, properly lubricated and kept within the manufacturer's specified tolerances. If a frozen or malfunctioning brake is suspected, Cummins says to follow the fleet's procedures and the manufacturer's guidance before attempting to move the vehicle.

Properly inflated tires are an important part of winter readiness, and cold temperatures can affect tire pressure while ice and road debris can damage parts of a trailer tire inflation system. Cummins advises inspecting the tires and checking inflation according to the vehicle and tire manufacturers' recommendations before each trip. On trailers equipped with a tire inflation system such as the Meritor Tire Inflation System (MTIS), drivers should also check for air leaks and for damaged or disconnected air lines, hoses and related components. The checks cover pressure appropriate for the tire, load and application; visible damage, excessive wear or other issues; inflation system air lines and hoses; and thru-tees and related components.

Winter roads place major demands on drivetrain components, and Cummins says extreme cold can create shock loads that contribute to damage such as twisted driveline tubing, broken welds or fractured splines. Changes in traction can also increase the risk of wheel spinouts: when one or both wheels on an axle lose traction and spin while wheels on the other axle are stationary or moving slowly, the spinout can contribute to differential and carrier damage. Drivers should pay attention to changes in how the truck sounds and feels, plus any other new or abnormal noises. Cummins says such symptoms should be reported promptly so a qualified technician can inspect the vehicle and identify the cause.

Driveline warning signs Cummins says drivers should watch for
  • Clanking or squeaking
  • Unusual vibration
  • Jerkiness during operation
  • Other new or abnormal noises

The symptoms can have several causes, including issues with U-joints, center bearings or yokes. Potholes can also affect clutch adjustment and contribute to reduced clutch life or an inoperable clutch, so the clutch belongs in the inspection and maintenance plan and changes in clutch operation should be reported for further evaluation. On steering and suspension, potholes and deteriorated winter roads can affect vehicle control and add stress to components, and an impact that seems minor from the cab may warrant a closer look during the next inspection. Cummins says a qualified technician should check alignment and inspect components such as king pins, shocks and suspension parts, particularly after a significant pothole impact or when the truck's handling changes, since proper maintenance helps keep the tires in contact with the road and supports vehicle control. Winter readiness starts before the first major storm, and understanding cold-weather component issues, completing preventive maintenance and planning for replacement parts can help keep trucks on the road throughout the season.

Cummins' recommended winter pre-trip routine
  • Walk around the truck and trailer and look for visible damage, leaks, ice buildup or components that appear loose or out of place.
  • Check tires and inflation components for damage and verify tire pressure as required.
  • Pay attention to the brake and air systems and report signs of air leaks, freezing, unusual purging or brake concerns.
  • Look and listen for changes, including unusual driveline noises, vibration, jerkiness or changes in steering and clutch operation.
  • Address concerns before departure by having a qualified technician investigate and perform any needed lubrication, adjustment or repair using the appropriate service instructions.

Why this matters

Freezing temperatures, moisture, ice and deteriorating roads can affect components throughout a truck, from brakes and air systems to the driveline and suspension. Cummins says a winter maintenance plan can help fleets and drivers catch potential issues before they turn into downtime, which matters to the fleets that run the trucks and the drivers behind the wheel.

Terms in This Story

driveline
The set of components — shafts, joints and axles — that carries power from the engine and transmission to the wheels.
automatic slack adjuster
An air-brake component that automatically adjusts the brake linkage to compensate for wear on brake shoes and drums.
thru-tee
A T-shaped fitting used in a trailer tire inflation system to route air to the tires.
king pin
A vertical pin that connects the steering knuckle to the front axle and lets the wheels pivot when the truck steers.
Read Original: Cummins Inc.

Summarised from the linked release; details can be imperfect — always verify against the original source.

How useful was this article?

Feedback goes to the MotorClaw Desk and does not subscribe you to email. Privacy.