MotorClaw.news
Subscribe
Search releases, companies, topics...
Updated

DEKRA crash and road tests show how work zones can be made safer

DEKRA crash tests and road trials show that impact absorbers, C-ITS warnings and truck emergency braking assistants can sharply cut the danger around road construction sites.

Work-zone fatalities in the U.S. in 2023
899
Maximum head acceleration with impact absorber v
around 17 g vs. around 25 g
Approach speed at which C-ITS warnings still rea
130 km/h
Share of German short-term work-site accidents c
around 60 percent

What Happened

A brief moment of inattention behind the wheel is all it takes to put people working at a road construction site in acute danger. DEKRA's Road Safety Report 2026, titled Working in Road Traffic, uses crash tests and driving tests to show how that risk can be reduced, especially at short-term work sites. Energy-absorbing attenuators, digital construction zone warnings and modern emergency braking assistants offer significant safety potential even in complex scenarios. DEKRA accident researcher Markus Egelhaaf says it is also clear that existing safety concepts need to be further developed and technical solutions need to be utilized more consistently.

Work-zone fatalities in the U.S. in 2023

899deaths

Out of more than 100,000 crashes in work zones, according to NHTSA; 176 people on foot in construction zones were struck and killed, 40 of them while working at a site.

An analysis published as early as 2008 by the Federal Highway and Transport Research Institute (BASt) examined 951 accidents in Germany at short-term work sites in which employees, vehicles or equipment of the road construction authorities were damaged. Around 60 percent were caused by colliding trucks, with rear-end collisions and sideswipes particularly common. In about 80 percent of the cases, the injured workers were in their vehicles at the time of the accident. Egelhaaf attributes a large share of such accidents to typical behavioral errors such as inattention and distraction, often caused by monotonous traffic situations or activities unrelated to driving, as well as inappropriate speed.

Crash test: impact absorber versus warning sign on a trailer
Test setup
A van weighing around 3 metric tons hits the rear of a security vehicle weighing just under 18 metric tons at about 80 km/h.
Security vehicle with vehicle-mounted impact absorber
Impact energy dissipated in a controlled manner; the van's passenger compartment remained largely intact with maximum head acceleration around 17 g; the safety vehicle was displaced only slightly forward.
Security vehicle with warning sign on a trailer
Drawbar buckled and the trailer was pushed under the safety vehicle; little energy absorbed, so forces and injury risk were higher, with maximum head acceleration around 25 g; the safety vehicle was displaced significantly further toward the simulated work site.

C-ITS stands for Cooperative Intelligent Transport System: technologies for multi-modal communication of vehicles with other vehicles, infrastructure and non-motorized road users, exchanging information and warnings directly and/or through a backend system. DEKRA tested this with a C-ITS-enabled passenger car and a correspondingly equipped warning trailer, and the warning messages were issued with a high degree of reliability and reached the driver in a timely manner even at approach speeds of 130 km/h, which Egelhaaf says gives drivers enough time to reduce speed or initiate a lane change early. Separate road tests examined emergency braking assistance systems for heavy-duty commercial vehicles and their detection of mobile warning signs: a tractor-trailer without a semi-trailer was driven at speeds including 60 km/h on sections resembling country roads and 85 km/h in a section classified as a freeway toward a secured construction zone of warning beacons, a mobile barrier sign and a towing vehicle. In numerous scenarios the systems issued early visual and audible warnings and initiated automatic braking, responding reliably in all tests on straight stretches at 60 km/h and behaving consistently at 85 km/h particularly when the barrier trailer was positioned on the right, with detection still high at night. Limitations appeared where curves or lateral obstructions narrowed the field of view, and Egelhaaf concludes that even high-performance driver-assistance systems reach geometric and physical limits.

Safety measures DEKRA highlights
  • Energy-absorbing crash cushions and vehicle-mounted impact absorbers that dissipate impact energy in a controlled way
  • C-ITS short-range warnings that alert drivers several hundred meters ahead of a construction zone
  • Portable rumble strips and mobile early-warning devices
  • Emergency braking assistants on heavy trucks that warn the driver and brake automatically where collisions cannot otherwise be prevented
“The greatest safety benefit is achieved when technical systems support people in perception and decision-making, make critical situations recognizable early on, and thereby create more time for an appropriate response.”
— Markus Egelhaaf, DEKRA accident researcher

Previously from DEKRA

Today's findings sit within DEKRA's wider Road Safety Report 2026 work on people who work in road traffic. In October 2026 DEKRA published a report linking work stress, alcohol and drugs to dangerous driving among professional truck and bus drivers, finding that fatigue and stressful conditions can lead to alcohol and drug use behind the wheel. In September 2026, a joint DEKRA study of 75 real truck accidents that killed or seriously injured pedestrians, cyclists and motorcyclists found that driver assistance systems could have helped in most cases.

Background drawn from MotorClaw's earlier coverage of DEKRA's official releases.

Why this matters

Road workers and drivers face acute risk at short-term construction sites: NHTSA counted 899 work-zone deaths in the U.S. in 2023 alone. DEKRA's tests show which technical measures actually reduce injury risk and where physics still limits them, which matters to road authorities, truck operators and anyone driving through a work zone.

Terms in This Story

C-ITS
Cooperative Intelligent Transport System: technology that lets vehicles exchange information and hazard warnings with other vehicles, with infrastructure and with non-motorized road users.
Impact absorber
An energy-absorbing device mounted on a safety vehicle or trailer that takes up crash energy in a controlled way instead of passing it on to occupants or workers.
Emergency braking assistant
A driver-assistance system that warns the driver of a detected hazard and can initiate automatic braking.
Rumble strips
Raised or grooved strips across the road that vibrate and make noise when driven over, warning drivers of a hazard ahead.
Read Original: DEKRA

Summarised from the linked release; details can be imperfect — always verify against the original source.

How useful was this article?

Feedback goes to the MotorClaw Desk and does not subscribe you to email. Privacy.