MotorClaw.news
Subscribe
Search releases, companies, topics...
Updated

OXTS and Hesai combine GNSS, inertial and lidar positioning to keep machines on track when satellites drop out

When a mapping vehicle enters a tunnel or a robot moves indoors, satellite positioning can vanish — OXTS and Hesai are pairing lidar with GNSS and inertial navigation to keep the fix.

Positioning sources combined in WayFinder
3
Dimensions of environment measured by lidar
3D

What Happened

GNSS signals can become weak, unreliable or unavailable inside tunnels, between tall buildings, under dense foliage and indoors. For mobile mapping, robotics and other positioning-critical applications, losing that reference can mean increasing localisation error, interrupted workflows or the need for reinitialisation. OXTS and Hesai are addressing the challenge by bringing together three complementary sources of information: GNSS for global positioning, inertial navigation for continuous motion tracking and lidar for a precise 3D reference of the surrounding environment, all combined through the OXTS WayFinder family.

The three positioning sources in WayFinder
  • GNSS provides the global position reference when enough satellite signals are available.
  • INS/IMU continuously measures motion and orientation, and can keep estimating movement when GNSS becomes unavailable.
  • Hesai lidar measures the surrounding environment in 3D, so walls, buildings, tunnel structures and other physical features become part of the positioning process.
  • OXTS LiDAR Boost incorporates lidar-derived information into the GNSS/INS positioning solution to compensate for missing or erroneous GNSS updates.

Techniques such as Real-Time Kinematic positioning, or RTK, can significantly improve GNSS accuracy when sufficient satellite information remains available, but they cannot remove the underlying dependency on satellite visibility. An Inertial Navigation System tracks acceleration and rotation using an IMU and can continue estimating movement during an outage, yet small inertial measurement errors accumulate over time. Without an external reference to constrain them, the difference between the estimated position and the actual position keeps growing, so reliable localisation through a GNSS outage requires another source of information. Lidar supplies that: rather than looking upward for satellites, it captures precise 3D geometry of the physical surroundings as an environmental reference.

“Our partnership with Hesai brings together high-precision positioning technology and advanced LiDAR capabilities to deliver accurate, reliable and efficient mobile mapping solutions through the WayFinder product family. We've worked closely with Hesai now for a number of years, and their technology was the obvious choice for this integration due to its ease of use and best in class ranging accuracy.”
— Stan McCarthy, Senior R&D Engineer – Navigation Software, OXTS
WayFinder Prime vs. WayFinder Hub
WayFinder Prime
Combines an OXTS INS with the Hesai XT32M1X lidar sensor in one integrated solution.
WayFinder Hub
Enables lidar-supported localisation to be added to an existing OXTS INS setup; OXTS recommends the XT32M1X for it.
Other Hesai lidar models with WayFinder Hub
Can be used but require additional testing and are not currently fully supported by OXTS.

The value of the integration becomes clearest where GNSS conditions change within a single operation. A mobile mapping vehicle may move from open roads into tunnels or dense urban areas during the same capture run, and maintaining localisation through those transitions can reduce interruptions and the need for manual reinitialisation. OXTS has also put WayFinder Prime to work mapping inside a mine, a particularly challenging GNSS-denied environment, while robots and other mobile platforms may move between outdoor, covered and indoor spaces, and industrial and logistics sites often have buildings or covered areas that interrupt satellite visibility. All data remains owned and controlled by the customer, with processing and storage handled within the customer's own systems, and Hesai does not store customer data.

Previously from Hesai Technology

Hesai lidar has already been used for mapping work in factory settings: earlier MotorClaw coverage described a Visimind IDL device built around Hesai's XT32 lidar and SLAM that let a manufacturer record forklift routes digitally across 12 factory units, replacing a person following forklifts with pen and paper. We have also covered Hesai's explanation of why lidar matters for warehouse robots, farm machines, drones and humanoids — because measuring the space around a machine, not just following a route, is what keeps it working when conditions change.

Background drawn from MotorClaw's earlier coverage of Hesai Technology's official releases.

Why this matters

Satellite positioning is how most machines know where they are, but it fails in tunnels, warehouses, mines and dense cities — exactly where mapping vehicles, robots and industrial systems increasingly work. Combining lidar with GNSS and inertial navigation aims to keep those operations running without interruptions or manual reinitialisation, and OXTS says WayFinder brings the three sources together in one system rather than making customers build the integration themselves.

Terms in This Story

GNSS
Global Navigation Satellite System — satellite constellations that provide position and timing signals to receivers on the ground.
INS / IMU
An Inertial Navigation System estimates position and motion using an Inertial Measurement Unit, which measures acceleration and rotation without relying on external signals.
RTK
Real-Time Kinematic positioning — a technique that corrects satellite positioning in real time to achieve higher accuracy.
Lidar
A sensor technology that uses laser pulses to measure distances and build a precise 3D picture of the surrounding environment.
Read Original: Hesai Technology

Summarised from the linked release; details can be imperfect — always verify against the original source.

How useful was this article?

Feedback goes to the MotorClaw Desk and does not subscribe you to email. Privacy.