MotorClaw.news
Subscribe
Search releases, companies, topics...
Updated

Renault details battery strategy: LFP and NMC chemistries, Cell-to-Pack, and cobalt-free cells ahead

Renault says the battery takes 30% to 50% of an electric car's cost, so instead of hunting a miracle chemistry it is betting on two chemistries plus tighter cell integration.

Battery share of an electric vehicle's total cos
30% to 50%
Battery cost related to chemistry
about 70%
Battery cost cut by LFP plus Cell-to-Pack since
about 20%
Lithium metal target versus NMC energy density
up to twice

What Happened

An electric car's battery is an energy storage system: its cells store energy in chemical form and release it as electricity to power the motor. Its overall performance is partly fixed at cell level, through energy capacity, charge and discharge speed, ageing and thermal behaviour. Renault Group's battery roadmap therefore rests on two complementary levers: improving cell performance while cutting cost through chemistry, and integrating cells better in the vehicle so more energy fits in the same space. The Group says there is no miracle technology at this stage, so it aims for the best balance between performance, cost and robustness for each driver's needs.

Battery chemistries Renault uses and is developing
NMC (Nickel Manganese Cobalt)
High energy density, storing a lot of energy in a compact space and favouring range; uses nickel and cobalt, which weighs on supply costs
LFP (Lithium Iron Phosphate)
Lower energy density but cheaper and more robust; suited to urban and suburban travel and to making electric vehicles more affordable
Future chemistries
Cobalt-free silicon-based cells for the medium term, targeting NMC-level density with LFP-level cost and robustness; lithium metal for the longer term, targeting up to twice NMC density
Share of an electric vehicle's total cost taken by the battery

30% to 50%

About 70% of the battery's own cost is related to its chemistry, Renault says, which is why chemistry choices shape vehicle prices.

Renault is preparing a new generation of cobalt-free, silicon-based batteries for the medium term, with the ambition of reaching energy density comparable to NMC while targeting the cost and robustness of LFP. In the longer term the Group is exploring lithium metal, aiming for up to twice the density offered by NMC chemistry with comparable cost and robustness. This research already takes concrete form at the Lardy Technical Center, where teams prototype new cells and assess innovative chemistries in the Battery Cell Innovation Laboratory, identifying promising technologies and partners very early.

Battery milestones past, present and planned
  1. Early 2026

    Combining LFP chemistry with Cell-to-Pack had helped reduce battery cost by about 20%.

  2. 2026

    The Renault Twingo E-Tech electric becomes the first vehicle to use an LFP battery with pouch-type cells integrated directly into the pack, a world premiere developed with LG Energy Solution.

  3. Beginning of 2027

    A Battery Safety Test Center in Ruitz will carry out internal safety tests on cells, modules and packs under extreme conditions.

With LG Energy Solution, Renault developed Cell-to-Pack, which removes the intermediate module stage so cells go directly into the battery housing, placing more cells and more energy in the same volume while reducing mass, complexity and costs. This matters most with LFP, whose lower energy density is partly offset by better use of the space available while keeping its economic advantage. The Twingo E-Tech electric is the first application, to be followed by the Megane, Scenic and Trafic models in particular.

The next step is Cell-to-Chassis, in which the battery is no longer just an embedded element but directly contributes to the structure and rigidity of the vehicle. Designing battery and vehicle architecture as a single integrated system from the outset is meant to win volume efficiency, weight, cabin space and cost, because the earlier the battery is integrated the more every kilogram and litre can be optimised. The two levers remain complementary: better cells through new chemistries, and better integration to embed energy ever more efficiently.

Previously from Renault

Our earlier coverage noted that the Twingo E-Tech electric — the model that debuts the LFP Cell-to-Pack battery described here — is one of seven finalists for the 2027 Car of the Year. That gives Renault a sixth consecutive COTY final and puts a sub-€20,000 electric car in Europe's toughest segment.

Background drawn from MotorClaw's earlier coverage of Renault's official releases.

Why this matters

Battery chemistry and packaging drive both the price and the range of an electric car, so Renault's choices reach buyers directly: the Group says pairing LFP cells with Cell-to-Pack has already cut battery cost by about 20% since early 2026, on cars such as the Twingo E-Tech. Renault also argues there is no single miracle chemistry, so it spreads its bets across LFP, NMC and future cobalt-free and lithium-metal cells, which shapes what range and price customers get in each segment.

Terms in This Story

LFP
Lithium Iron Phosphate battery chemistry; it stores less energy per unit of volume or weight than NMC but is cheaper and more robust.
NMC
Nickel Manganese Cobalt battery chemistry; it offers high energy density, so it packs a lot of energy into a compact space, but its nickel and cobalt content weighs on supply costs.
Cell-to-Pack
A battery architecture in which cells are integrated directly into the battery housing without intermediate modules, leaving more room for cells in the same volume.
Cell-to-Chassis
An approach in which the battery is designed together with the vehicle architecture from the start and contributes to the vehicle's structure and rigidity.
Read Original: Renault

Summarised from the linked release; details can be imperfect — always verify against the original source.

How useful was this article?

Feedback goes to the MotorClaw Desk and does not subscribe you to email. Privacy.