MotorClaw.news
Subscribe
Search releases, companies, topics...
Updated

Audi A2 e-tron adds V2L and V2H charging, with V2G planned for the future

Audi's new A2 e-tron can power external devices and, with a compatible bidirectional wallbox, a whole house, with grid feed-in planned for later.

Battery variants
52, 61 and 84 kWh
DC charging 10 to 80 percent
24 to 29 minutes
DC charging power
100 to 183 kW

What Happened

Audi says the high-voltage battery of an electric car can do more than supply energy for driving: with bidirectional charging functions, the A2 e-tron lets external devices be supplied via Vehicle-to-Load and lets stored energy be used in the household via Vehicle-to-Home. Vehicle-to-Grid, which would feed energy back into the public power grid, is planned for the future. The compact model is available to order in three battery variants with 52, 61 and 84 kWh.

Key facts at a glance
  • Available to order in three battery variants: 52, 61 and 84 kWh
  • DC charging power from 100 to 183 kW
  • DC charging from 10 to 80 percent in 24 to 29 minutes
  • Vehicle-to-Load and Vehicle-to-Home expand use of the high-voltage battery
  • Vehicle-to-Grid will enable energy to be fed into the public power grid in the future
DC charging 10 to 80 percent

24–29minutes

Across the A2 e-tron's battery variants, measured under defined test conditions.

Battery and charging variants from Audi's table
  • 52 kWh gross battery capacity, 125 kW charging power, 10 to 80 percent in 24 minutes
  • 61 kWh gross battery capacity, 140 kW charging power, 10 to 80 percent in 26 minutes
  • 84 kWh gross battery capacity, 170 kW charging power, 10 to 80 percent in 29 minutes
  • 84 kWh gross battery capacity, 240 kW charging power, 10 to 80 percent in 29 minutes

Audi combines on-board chargers and DC/DC converters in a single advanced component called OCDC 2.0, which it says is designed for a plannable, controlled and usable charging process rather than a short-term power peak. The unit includes a higher number of metal-oxide-semiconductor field-effect transistors, adapted AC output management and corresponding software adjustments. A battery management controller monitors and regulates the battery; because LFP cells have a flatter open circuit voltage characteristic curve that makes state of charge and aging harder to determine precisely, Audi uses an adapted algorithm. The information obtained feeds into the calculation of range, charging behavior and operating strategy. Audi notes that actual charging times may depend on battery temperature, state of charge and available charging power, among other things.

Vehicle-to-Load lets the A2 e-tron supply suitable external consumers with electrical energy, making it a mobile and flexible energy source. Vehicle-to-Home uses the car as a large battery storage system and, in conjunction with a compatible bidirectional DC wallbox, makes it possible to use the stored electricity for the household. Vehicle-to-Grid will follow in the future depending on the market, vehicle equipment, compatible charging infrastructure, home installation, regulatory requirements and, if necessary, a suitable electricity tariff, at which point energy from the vehicle battery is provided to the public power grid. Audi says the aim is to make electric mobility in the compact segment suitable for everyday use, efficient and flexible, with the battery becoming an active part of the energy system.

Previously from Audi

Earlier coverage described the A2 e-tron as Audi's most efficient car ever, crediting a reworked electric motor, power electronics and transmission for WLTP consumption of 12.8 kWh/100 km. That claim covers the drivetrain side of the same compact electric model whose charging and energy functions are detailed here.

Background drawn from MotorClaw's earlier coverage of Audi's official releases.

Why this matters

Bidirectional charging means the car's battery keeps working after the drive: powering tools on site, backing up a home and eventually supporting the public grid. For compact-car buyers that makes the same pack useful in more situations, and Audi pairs it with charging electronics and thermal management aimed at repeatable, predictable charging.

Terms in This Story

Vehicle-to-Load (V2L)
Using an electric vehicle's battery to power external electrical devices, typically through an onboard outlet or adapter.
Vehicle-to-Home (V2H)
Feeding electricity from an electric vehicle's battery into a building's electrical system, usually via a bidirectional charger or wallbox.
Vehicle-to-Grid (V2G)
Sending electricity stored in an electric vehicle's battery back into the public power grid.
LFP
Lithium iron phosphate, a battery chemistry whose cells hold a relatively flat voltage curve across states of charge.
Read Original: Audi

Summarised from the linked release; details can be imperfect — always verify against the original source.

How useful was this article?

Feedback goes to the MotorClaw Desk and does not subscribe you to email. Privacy.