Audi A2 e-tron: upgraded APP350 electric drive hits 12.8 kWh/100 km
Audi calls the new A2 e-tron its most efficient car ever, crediting a reworked electric motor, power electronics and transmission for consumption of 12.8 kWh/100 km in the WLTP cycle.
- 140 kW
- 12.8 kWh/100 km
- 350 Nm
- More than 97 percent
What Happened
The new Audi A2 e-tron is, according to Audi, the most efficient Audi ever, and the company says the electric drive plays a decisive role in that alongside aerodynamics and battery technology. Improvements to the power electronics, the electric motor and the transmission are designed to complement one another in the electric compact model. Audi says customers benefit from low consumption, long range and pleasant acoustics. The headline figure is 12.8 kWh/100 km in the WLTP cycle for the 140 kW version fitted with the optional efficiency package.
- Silicon carbide semiconductors in the power electronics minimize switching losses
- Improved control reduces the switching frequency, especially in the partial-load range
- Thin rotor laminations reduce iron losses
- Stator winding in a delta configuration enables high torque and low consumption
- A long gear ratio of 10.2:1 keeps motor speeds low
- Transmission oil with very low viscosity reduces churning losses
At the rear of the A2 e-tron sits a permanent-magnet synchronous motor mounted parallel to the axle and running at a 400-volt level. The APP350 unit from the Volkswagen Group delivers up to 350 Nm of torque and was specifically optimized for the Modular Electric Drive Matrix (MEB) to give greater efficiency, longer range and more driving comfort at the same time. Its pulse inverter converts the direct current from the high-voltage battery into the alternating current the motor needs, controlling the energy flow precisely from sensor data. Audi replaced the silicon-based bipolar transistors that had been standard with silicon carbide MOSFETs, whose physical properties cut switching losses and allow efficiencies of more than 97 percent.
- Silicon-based bipolar transistors
- Silicon carbide (SiC) MOSFETs
- More than 97 percent
A new software function exploits the higher switching speed of the SiC MOSFETs, adjusting the switching frequency to the operating point so that lower frequencies mean fewer losses, particularly at medium speed and load in city traffic and on rural roads. Audi says the improved energy utilization also lets the power electronics supply the drive with full power at low states of charge. For acoustics, the inverter superimposes high-frequency harmonic components on the motor current to compensate for disruptive noises depending on the operating point. In the motor itself, rotor laminations are more than 30 percent thinner than in the MEB predecessor APP310, reducing iron losses, and the rotor segments are staggered rather than linear so that first-order vibrations are avoided and dominant tonal components almost eliminated, especially when pulling away from a standstill.
Switching the stator winding from a star to a delta configuration, together with fewer parallel branches, raises motor efficiency, particularly in the everyday partial-load ranges that matter most to customers. The compact, lightweight transmission contributes as well: depending on the performance level, the APP350 uses a ratio of i=10.21 at 125 kW and 140 kW, and i=11.53 at 170 kW, keeping motor speeds in the most efficient parts of the map. Fine machining of the gear teeth produces particularly smooth flanks, cutting friction, and also allows a specially developed low-viscosity transmission oil that, with optimized oil routing, significantly reduces churning losses in the gear set.
12.8kWh/100 km
Audi A2 e-tron 140 kW with the optional efficiency package
Previously from Audi
Audi's first nine months of 2026 brought lower deliveries, revenue and operating profit. The Group has cut its full-year forecast and is sharpening cost cuts and efficiency measures.
Background drawn from MotorClaw's earlier coverage of Audi's official releases.
Why this matters
Audi is selling efficiency rather than raw power here: lower consumption is what turns a given battery into cheaper running costs and more usable range, especially in the city and rural driving where the new software strategy works hardest. The compact model uses the Volkswagen Group APP350 drive in three performance levels, and Audi says drivers also gain acoustic comfort.
Terms in This Story
- WLTP
- The Worldwide Harmonised Light Vehicles Test Procedure, a standardised test cycle used to measure a vehicle's energy consumption and range.
- Silicon carbide (SiC)
- A semiconductor material used in power electronics that switches with lower losses than silicon, improving efficiency.
- Permanent-magnet synchronous motor
- An electric motor whose rotor carries permanent magnets and rotates in step with the magnetic field produced by the stator.
- Modular Electric Drive Matrix (MEB)
- The Volkswagen Group's modular platform for electric vehicles, for which the APP350 drive was designed.
Summarised from the linked release; details can be imperfect — always verify against the original source.