Cummins hybrid mining truck retrofits hit 15-20% fuel savings in Chile pilots
Cummins says hybrid retrofits of ultra-class mining haul trucks are delivering 15% to 20% fuel savings in Chilean pilots nearly 4,500 meters up in the Andes, without the half-billion-dollar infrastructure a fully…
- 15-20%
- 3-4 MW
- half a billion dollars
- nearly 4,500 m
What Happened
The story comes from Cummins' Power Onward podcast, where global brand manager Kim speaks with Molly, executive director of products, programs and digital in Cummins' industrial markets business. Cummins and First Mode are bringing hybrid electrification to mining haul trucks, building on equipment miners already run. First Mode is a provider of hybrid retrofit solutions that Cummins acquired; Molly led that acquisition effort and ran the business for about 18 months. She describes pairing First Mode's faster, field-trial approach with Cummins' scale and service network, including the Cummins Chile and Komatsu Chile distributors, which she says were critical to getting two pilots into the field and supporting them day to day.
Mining trucks run around the clock at peak load and minutes of downtime count, which Molly calls the most challenging environment to put a technology into and one of the most critical to power the world, since copper, lithium and coal all come from mining. Miners chase productivity first, then cost, then emissions. She notes mining is one of the highest-polluting industries and is not globally regulated, so miners manage their own footprint: most big miners have published 2030, 2040 and 2050 decarbonization goals.
- Each haul truck is 3 to 4 megawatts of power, so full electrification means generating enough power, transporting it to the mine and charging the vehicles; hybrids and dual-fuel solutions need no new infrastructure
- Mine infrastructure could easily be a half-billion-dollar investment on top of converting an entire fleet; a retrofit is a truck-by-truck choice with no meaningful investment
- Battery electric vehicles take over a decade to pay back because of the capital expense; hybrids lower total cost of ownership by cutting fuel
15-20%%
Cummins originally hoped for 15 to 20% on those particular routes; Molly says results are landing within a percent or two of the simulation.
The two pilots run at nearly 4,500 meters in the Andes, where Cummins is testing altitude and weather at the same time. In August the two mining customers were hit with about 10 feet of snow that nearly buried half the trucks; the batteries still worked at minus 35 degrees Celsius and the trucks started again after sitting under snow for weeks. Retrofitting is not for the faint of heart, Molly says: the deck and an upright support come off and a battery and another support go in, then Cummins factory and distribution teams commission the truck. Operators like the faster engine pickup and smoother acceleration the battery provides, and it meaningfully reduces the high-pitched whine from the retard grid mounted close to the cab.
“The operators actually fight to get the hybrid trucks at both of our mines.”
- Downhill loaded hauls with a lot of braking, where regenerative braking recharges the battery
- Mines with a lot of turns
- Routes hauling material out of a pit, which still involve heavy braking and heavy work
- Flat, constant-speed routes are the weakest fit from a techno-economic standpoint, because the extra battery is not needed
Why this matters
Mining is one of the highest-polluting industries and is not globally regulated, so miners must hit their own 2030, 2040 and 2050 carbon goals while chasing productivity and cost. A retrofit that cuts fuel 15% to 20% without new site infrastructure lets them start decarbonizing truck by truck instead of funding a roughly half-billion-dollar mine overhaul. Miners, truck operators, distributors and Cummins' First Mode unit all depend on the technology holding up in the field.
Terms in This Story
- Hybrid retrofit
- Fitting battery-electric components to an existing vehicle so it runs with a battery alongside its original engine, instead of buying a new vehicle.
- Regenerative braking
- A system that captures energy normally lost as heat when a vehicle brakes and uses it to recharge a battery.
- Total cost of ownership
- The full cost of running an asset over its life, including purchase price, fuel, maintenance and downtime.
- Dual fuel
- An engine setup that can run on a combination of two fuels rather than a single fuel.
Summarised from the linked release; details can be imperfect — always verify against the original source.