Valeo ramps up Valenton electrification R&D center and wins CLEPA Green award for recycled polycarbonate
Nearly a year after opening, Valeo is adding a 300 m² materials lab, a 1.3 MW supercharger and an extreme-climate wind tunnel at Valenton, and its recycled headlamp polycarbonate has won a CLEPA Green award.
- 400
- 1.3 MW
- 300 m²
- up to 50%
What Happened
Less than a year after opening the Valeo Power Technical Center (VPTC) in Valenton, in the Val-de-Marne department of France, Valeo says it is expanding its European R&D capabilities to accelerate the shift toward electrification. The site brings together 400 specialists in thermal management and propulsion around testing facilities including an extreme climate wind tunnel, thermal test benches, electric propulsion laboratories and a new materials laboratory. The center is dedicated to the group's Propulsion Systems and Thermal Management Systems expertise and is built as an integrated research and testing facility designed to shorten the design cycles of electrified vehicles. Valeo says the ramp-up covers electric propulsion, thermal management, cybersecurity and the new 300 m² Materials Laboratory, supported by laboratories embedded in software development, architecture and complete system validation.
- Extreme climate wind tunnel with artificial sunlight and a 1.3 MW supercharger, described by Valeo as one of the most powerful in Europe
- Integrated electric propulsion capability for the design, simulation and testing of electric propulsion systems
- Cybersecurity space for assessing vulnerabilities at full-vehicle level and at embedded electronic component level
- Electromagnetic compatibility center combining a semi-anechoic chamber and a Faraday cage
- Thermal systems test benches, including heat pump benches compatible with all refrigerants including R290, managing cabin, battery and propulsion thermal flows in real time
- Electronics and power modules laboratories for the design and advanced qualification of power boards and components
1.3 MW
Valeo calls it one of the most powerful in Europe; the tunnel runs from -40 °C to +55 °C with winds up to 160 km/h to test ultra-fast charging and thermal endurance.
“The scale-up of Valeo Power Technical Center illustrates our continued investments in electrification. Thanks to the unique testing facilities in Europe and to the expertise of 400 specialists on the site, we accelerate the architectural development of more compact, more efficient, more reliable, and more sustainable electric vehicles, directly supporting ecological transition of our automotive partners.”
Inside the VPTC, the new 300 m² Materials Laboratory is part of a global network of nine major materials expertise laboratories operated by Valeo, three of which are in France. It is equipped with a comprehensive range of analytical equipment and brings together engineers and specialists working with the group's other sites and with external partners in co-development. Valeo says this supports the evolving needs of electrification by optimizing the carbon footprint from the very choice of raw materials and by accelerating the deployment of recycled materials ahead of future regulations on end-of-life vehicles. On November 19 in Brussels, the European Automotive Supplier Association (CLEPA) named Valeo Top Innovator in the Green category of its 2026 Innovation Awards for ReVive Polycarbonate.
“By shifting the environmental impact from the usage phase upstream in the life cycle, the rise of electric vehicles is profoundly transforming the choice and carbon footprint of raw materials. Faced with ecological imperatives and supply tensions over strategic metals induced by batteries, materials science provides essential insight: it makes it possible to reconcile the reduction of the global carbon footprint, supply sovereignty, and high technological performance for the mobility of tomorrow.”
- Non-reusable material sourced from end-of-life headlamps recovered during disassembly for refurbishment
- Up to 50%
- 50%
Previously from Valeo
Valeo has been rolling out electrification and thermal technologies across its businesses in recent weeks. On November 19, 2026 it and Renault Group won the 2026 Automotive News PACE Innovation Partnership Award for a 48V two-speed rear eAxle that brings all-wheel-drive traction and 60% electric driving in cities without a high-voltage system. A day earlier, Valeo unveiled an aluminum rear-door cooling module for data centers, claiming 38% more cooling capacity and 65% higher power density than copper equivalents.
- Valeo and Renault Group win 2026 Automotive News PACE Innovation Partnership Award for 48V 2-Speed eAxle
- Valeo unveils aluminum rear-door cooling module for data centers, claiming 38% more cooling than copper
Background drawn from MotorClaw's earlier coverage of Valeo's official releases.
Why this matters
The Valenton technical center is where Valeo designs and tests electric propulsion and thermal systems for automakers, so its equipment and its 400 specialists shape how quickly more efficient, faster-charging EVs are developed. The recycled polycarbonate matters for both suppliers and buyers because Valeo says it is meant to get ahead of future regulations on end-of-life vehicles.
Terms in This Story
- Polycarbonate
- A strong, transparent engineering plastic typically used for durable parts such as headlamp components.
- Thermal management
- The engineering of heating and cooling in a vehicle, covering flows for the cabin, the battery and the propulsion system.
- Homologate
- To certify that a vehicle or component meets the technical and legal standards required before it can be sold.
- End-of-life vehicles
- Vehicles that have reached the end of their useful life and enter dismantling, recycling or recovery.
Summarised from the linked release; details can be imperfect — always verify against the original source.